Add sphinx API documentation

docs/Makefile

@@ -0,0 +1,20 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+SPHINXPROJ    = baseimage-tutorial-framework
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

docs/make.bat

@@ -0,0 +1,36 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+set SPHINXPROJ=baseimage-tutorial-framework
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.http://sphinx-doc.org/
+	exit /b 1
+)
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+
+:end
+popd

docs/source/components/components.rst

@@ -0,0 +1,25 @@
+Components
+----------
+
+.. automodule:: tfw.components
+
+.. autoclass:: IdeEventHandler
+    :members:
+
+.. autoclass:: TerminalEventHandler
+    :members:
+
+.. autoclass:: ProcessManagingEventHandler
+    :members:
+
+.. autoclass:: LogMonitoringEventHandler
+    :members:
+
+.. autoclass:: TerminalCommands
+    :members:
+
+.. autoclass:: HistoryMonitor
+    :members:
+
+.. autoclass:: BashMonitor
+    :members:

docs/source/conf.py

@@ -0,0 +1,166 @@
+# -*- coding: utf-8 -*-
+#
+# Configuration file for the Sphinx documentation builder.
+#
+# This file does only contain a selection of the most common options. For a
+# full list see the documentation:
+# http://www.sphinx-doc.org/en/master/config
+
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+import os
+import sys
+sys.path.insert(0, os.path.abspath('../../lib'))
+
+
+# -- Project information -----------------------------------------------------
+
+project = 'baseimage-tutorial-framework'
+copyright = '2018, Avatao Innovative Learning Kft'
+author = 'Kristóf Tóth'
+
+# The short X.Y version
+version = ''
+# The full version, including alpha/beta/rc tags
+release = 'bombay'
+
+
+# -- General configuration ---------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
+source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'index'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path .
+exclude_patterns = []
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+
+# -- Options for HTML output -------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+html_theme = 'alabaster'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#
+# html_theme_options = {}
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# Custom sidebar templates, must be a dictionary that maps document names
+# to template names.
+#
+# The default sidebars (for documents that don't match any pattern) are
+# defined by theme itself.  Builtin themes are using these templates by
+# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
+# 'searchbox.html']``.
+#
+# html_sidebars = {}
+
+
+# -- Options for HTMLHelp output ---------------------------------------------
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'baseimage-tutorial-frameworkdoc'
+
+
+# -- Options for LaTeX output ------------------------------------------------
+
+latex_elements = {
+    # The paper size ('letterpaper' or 'a4paper').
+    #
+    # 'papersize': 'letterpaper',
+
+    # The font size ('10pt', '11pt' or '12pt').
+    #
+    # 'pointsize': '10pt',
+
+    # Additional stuff for the LaTeX preamble.
+    #
+    # 'preamble': '',
+
+    # Latex figure (float) alignment
+    #
+    # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (master_doc, 'baseimage-tutorial-framework.tex', 'baseimage-tutorial-framework Documentation',
+     'Kristóf Tóth', 'manual'),
+]
+
+
+# -- Options for manual page output ------------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'baseimage-tutorial-framework', 'baseimage-tutorial-framework Documentation',
+     [author], 1)
+]
+
+
+# -- Options for Texinfo output ----------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'baseimage-tutorial-framework', 'baseimage-tutorial-framework Documentation',
+     author, 'baseimage-tutorial-framework', 'One line description of project.',
+     'Miscellaneous'),
+]
+
+
+# -- Extension configuration -------------------------------------------------
+def skip(app, what, name, obj, skip, options):
+    if name == "__init__":
+        return False
+    return skip
+
+def setup(app):
+    app.connect("autodoc-skip-member", skip)

docs/source/foundations/eventhandlers.rst

@@ -0,0 +1,12 @@
+Event handler base classes
+--------------------------
+
+Subclass these to create your cusom event handlers.
+
+.. automodule:: tfw
+
+.. autoclass:: EventHandlerBase
+    :members:
+
+.. autoclass:: TriggeredEventHandler
+    :members:

docs/source/foundations/fsms.rst

@@ -0,0 +1,12 @@
+FSM base classes
+----------------
+
+Subclass these to create an FSM that fits your tutorial/challenge.
+
+.. automodule:: tfw
+
+.. autoclass:: FSMBase
+    :members:
+
+.. autoclass:: LinearFSM
+    :members:

docs/source/foundations/tfwserver.rst

@@ -0,0 +1,7 @@
+TFWServer
+---------
+
+.. automodule:: tfw.networking
+
+.. autoclass:: TFWServer
+    :members:

docs/source/index.rst

@@ -0,0 +1,45 @@
+.. baseimage-tutorial-framework documentation master file, created by
+   sphinx-quickstart on Fri Jun  1 14:29:07 2018.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+Welcome to baseimage-tutorial-framework's documentation!
+========================================================
+
+Foundations
+-----------
+
+This part covers the soil which the framework is based on and stuff you will need to develop your own challenges.
+
+.. toctree::
+    :glob:
+
+    foundations/*
+
+Networking
+----------
+
+You can use these to send messages to the frontend or the event handlers through TFWServer.
+
+.. toctree::
+    :glob:
+
+    networking/*
+
+Components
+----------
+
+These are pre-written components for you to use, such as our IDE, terminal or console.
+
+.. toctree::
+    :glob:
+
+    components/*
+
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`

docs/source/networking/networking.rst

@@ -0,0 +1,17 @@
+Networking
+----------
+
+.. automodule:: tfw.networking
+
+.. autoclass:: TFWServerConnector
+    :members:
+
+.. automodule:: tfw.networking.event_handlers
+
+.. autoclass:: ServerUplinkConnector
+    :members:
+
+.. automodule:: tfw.networking
+
+.. autoclass:: MessageSender
+    :members:

lib/tfw/components/ide_event_handler.py

@@ -101,9 +101,10 @@ class IdeEventHandler(EventHandlerBase, MonitorManagerMixin):
     When any file in the selected directory changes they are automatically refreshed
     on the frontend (this is done by listening to inotify events).
 
-    This EventHandler accepts messages that have a data["command"] key specifying
+    This EventHandler accepts messages that have a data['command'] key specifying
     a command to be executed.
-    The API of each command is documented in their respective handlers.
+
+    The API of each command is documented in their respective handler.
     """
     def __init__(self, key, directory, allowed_directories, selected_file=None, exclude=None,
                  additional_watched_directories=None):
@@ -112,7 +113,7 @@ class IdeEventHandler(EventHandlerBase, MonitorManagerMixin):
         :param directory: working directory which the EventHandler should serve files from
         :param allowed_directories: list of directories that can be switched to using the selectdir command
         :param selected_file: file that is selected by default
-        :param exclude: list of filenames that should not appear between files (for *.o, *.pyc, etc.)
+        :param exclude: list of filenames that should not appear between files (for .o, .pyc, etc.)
         :param additional_watched_directories: refresh the selected file when files change in these directories
                                                (the working directory is watched by default, this is useful for
                                                symlinks and such)
@@ -139,7 +140,7 @@ class IdeEventHandler(EventHandlerBase, MonitorManagerMixin):
         """
         Read the currently selected file.
 
-        :return: message with the contents of the file in data['content']
+        :return dict: message with the contents of the file in data['content']
         """
         try:
             data['content'] = self.filemanager.file_contents
@@ -155,8 +156,9 @@ class IdeEventHandler(EventHandlerBase, MonitorManagerMixin):
         """
         Overwrites a file with the desired string.
 
-        :param data: TFW message data containing keys:
-               |-string: containing the desired file contents
+        :param data: TFW message data containing key 'content'
+                     (new file content)
+
         """
         self.monitor.ignore = self.monitor.ignore + 1
         try:
@@ -170,8 +172,8 @@ class IdeEventHandler(EventHandlerBase, MonitorManagerMixin):
         """
         Selects a file from the current directory.
 
-        :param data: TFW message data containing keys:
-               |-filename: name of file to select relative to the current directory
+        :param data: TFW message data containing 'filename'
+                     (name of file to select relative to the current directory)
         """
         try:
             self.filemanager.filename = data['filename']
@@ -183,10 +185,10 @@ class IdeEventHandler(EventHandlerBase, MonitorManagerMixin):
         """
         Select a new working directory to display files from.
 
-        :param data: TFW message data containing keys:
-               |-directory: absolute path of diretory to select.
+        :param data: TFW message data containing 'directory'
+                     (absolute path of diretory to select.
                      must be a path whitelisted in
-                            self.allowed_directories
+                     self.allowed_directories)
         """
         try:
             self.filemanager.workdir = data['directory']
@@ -204,8 +206,9 @@ class IdeEventHandler(EventHandlerBase, MonitorManagerMixin):
         """
         Overwrite list of excluded files
 
-        :param data: TFW message data containing keys:
-               |-exclude: list of filename patterns to be excluded, e.g.: ["*.pyc", "*.o"]
+        :param data: TFW message data containing 'exclude'
+                     (list of unix-style filename patterns to be excluded,
+                     e.g.: ["\*.pyc", "\*.o")
         """
         try:
             self.filemanager.exclude = list(data['exclude'])

lib/tfw/components/log_monitoring_event_handler.py

@@ -14,7 +14,10 @@ class LogMonitoringEventHandler(EventHandlerBase, MonitorManagerMixin):
     Monitors the output of a supervisor process (stdout, stderr) and
     sends the results to the frontend.
 
-    Exposes API to change monitoring parameters.
+    Accepts messages that have a data['command'] key specifying
+    a command to be executed.
+
+    The API of each command is documented in their respective handler.
     """
     def __init__(self, key, process_name, log_tail=0):
         super().__init__(key)
@@ -39,8 +42,8 @@ class LogMonitoringEventHandler(EventHandlerBase, MonitorManagerMixin):
         """
         Changes the monitored process.
 
-        :param data: TFW message data containing keys:
-               |-value: name of the process to monitor
+        :param data: TFW message data containing 'value'
+                     (name of the process to monitor)
         """
         self.set_monitor_args(data['value'], self.log_tail)
 
@@ -50,8 +53,8 @@ class LogMonitoringEventHandler(EventHandlerBase, MonitorManagerMixin):
         to the frontend (the monitor will send back the last
         'value' characters of the log).
 
-        :param data: TFW message data containing keys:
-               |-value: new tail length
+        :param data: TFW message data containing 'value'
+                     (new tail length)
         """
         self.set_monitor_args(self.process_name, data['value'])
 

lib/tfw/components/process_managing_event_handler.py

@@ -25,9 +25,9 @@ class ProcessManagingEventHandler(EventHandlerBase):
     """
     Event handler that can manage processes managed by supervisor.
 
-    This EventHandler accepts messages that have a data["command"] key specifying
+    This EventHandler accepts messages that have a data['command'] key specifying
     a command to be executed.
-    Every message must contain a data["process_name"] field with the name of the
+    Every message must contain a data['process_name'] field with the name of the
     process to manage. This is the name specified in supervisor config files like so:
     [program:someprogram]
 

lib/tfw/components/terminal_commands.py

@@ -19,13 +19,13 @@ class TerminalCommands(ABC):
     To receive events you need to subscribe TerminalCommand.callback to a HistoryMonitor
     instance.
 
-    Inherit from this class and define methods which start with "command_". When the user
+    Inherit from this class and define methods which start with "command\_". When the user
     executes the command specified after the underscore, your method will be invoked. All
-    such commands must expect the parameter *args which will contain the arguments of the
+    such commands must expect the parameter \*args which will contain the arguments of the
     command.
 
     For example to define a method that runs when someone starts vim in the terminal
-    you have to define a method like: "def command_vim(self, *args)"
+    you have to define a method like: "def command_vim(self, \*args)"
 
     You can also use this class to create new commands similarly.
     """

lib/tfw/components/terminal_event_handler.py

@@ -16,9 +16,9 @@ class TerminalEventHandler(EventHandlerBase):
     sessions to connect to. You need to instanciate this in order for frontend
     terminals to work.
 
-    This EventHandler accepts messages that have a data["command"] key specifying
+    This EventHandler accepts messages that have a data['command'] key specifying
     a command to be executed.
-    The API of each command is documented in their respective handlers.
+    The API of each command is documented in their respective handler.
     """
     def __init__(self, key, monitor):
         """
@@ -54,8 +54,8 @@ class TerminalEventHandler(EventHandlerBase):
         Writes a string to the terminal session (on the pty level).
         Useful for pre-typing and executing commands for the user.
 
-        :param data: TFW message data containing keys:
-               |-value: command to be written to the pty
+        :param data: TFW message data containing 'value'
+                     (command to be written to the pty)
         """
         self.terminado_server.pty.write(data['value'])
 
@@ -63,9 +63,9 @@ class TerminalEventHandler(EventHandlerBase):
         """
         Reads the history of commands executed.
 
-        :param data: TFW message data containing keys:
-               |-count: the number of history elements to return
-        :return: message with list of commands in data['history']
+        :param data: TFW message data containing 'count'
+                     (the number of history elements to return)
+        :return dict: message with list of commands in data['history']
         """
         data['count'] = int(data.get('count', 1))
         if self.historymonitor:

lib/tfw/linear_fsm.py

@@ -11,7 +11,6 @@ class LinearFSM(FSMBase):
     a number of steps specified in the constructor. It automatically sets up 2
     actions (triggers) between states as such:
     (0) --  step_1  --> (1) --  step_2  --> (2) --  step_3  --> (3) ... and so on
-        \-step_next-/       \-step_next-/       \-step_next-/
     """
     def __init__(self, number_of_steps):
         self.states = list(map(str, range(number_of_steps)))